home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Fritz: All Fritz
/
All Fritz.zip
/
All Fritz
/
FILES
/
GAMETORS
/
APOLOSIM.LZH
/
12.CMT
< prev
next >
Wrap
Text File
|
1987-01-24
|
3KB
|
95 lines
****** BEGIN *** TUTORIAL *** # 1 - 2 ******
32560
Tutorial # 1-2 covers transfer to and checkout of the LM
32565
..through undocking and separation from the LOL
32570
..and ends before the first plane change maneuver.
32580
*** LOOK AT THE INS DISPLAY *** It is in "POS-TAR" mode.
32590
Transfer to the LM begins when the LM is 60° west of the landing site.
32600
*** LOOK AT THE STATUS DISPLAY ***
32610
Pilot metabolism is 31%, efficiency is 76%, and injury is 1%.
32620
Transfer to the LM begins and takes about 40 min to complete.
34200
Pilot metabolism has risen to 60% and efficiency has dropped to 68%.
35005
Transfer is complete and the Pilot is in the LM.
35015
Undocking occurs when the LM is 155° east of the landing site.
35460
Undocking begins and takes 60 s to complete.
35530
The LM is undocked.
35540
*** LOOK AT THE STATUS DISPLAY *** The DOCKING light is out.
35550
The LM is 22 m from the LOL and moving away at 0.1 m/s.
35560
*** LOOK AT THE BODY AXIS DISPLAYS *** The LM Up body axis is pointed south.
35570
*** LOOK AT THE LM-CONSUMABLES DISPLAY *** The RCS throttle is set to LOW.
35580
The first separation burn, using the RCS DOWN thruster, occurs
35585
..when the LM is 50 m from the LOL.
35865
The first separation burn begins
35870
..and continues until the separation velocity is 0.3 m/s.
35880
At an acceleration of 0.0011 m/s², a 0.2 m/s change takes about 3 min.
36030
The first separation burn is complete.
36120
The LM is 100 m from the LOL so the second burn may be performed safely.
36185
The LM is 118° east of the landing site
36190
..and is put into the proper attitude for the second separation burn.
36200
The LM is rolled so that the Face body axis
36205
..is pointing nearly straight up at 105° east of the landing site.
36245
The LM attitude is approximately correct for the second separation burn.
36265
The RCS throttle is set to MEDIUM.
36345
The LM attitude is adjusted slightly.
36405
The second separation burn begins 105° east of the landing site
36415
..and increases the LM vertical velocity by 1 m/s
36420
..so that the Descent Orbit Insertion burn occurs
36425
..near perilune (closest approach) at 165° west of the landing site.
36440
The second separation burn begins using the RCS FACE thruster.
36450
The burn continues until the LM vertical velocity is increased by 1 m/s.
36460
At an acceleration of 0.011 m/s², a 1 m/s change takes about 90 s.
36475
*** LOOK AT THE ATTITUDE AND BODY AXIS DISPLAYS ***
36485
The LM Face body axis is within a few degrees of vertical.
36535
The second separation burn is complete.
36545
The LM is 99° east of the landing site.
36555
The Deep Space Network transponder is turned on
36560
..and begins to provide updates to the INS.
36590
This concludes TUTORIAL # 1-2 ... The mission continues with TUTORIAL # 1-3.
36599
999999